41 - 50 of 222
corrosion testing machine
Selling leads
|
Introduction This is a fire test for determining values of flame propagation height for electrical and optical-fiber cables that are for installation ...
2024-12-09 21:14:01
|
|
... air is supplied to the box, 24KW radiation illuminance is also provided for the sample. Carry out combustion test on the transformer sample under ...
2024-12-09 21:23:40
|
|
General Introduction 1.1 Equipment overview Single wire and cable tilting flame tester is generally applicable to road vehicles 60V and 600V single ...
2026-02-13 00:28:13
|
|
General Introduction 1.1 Equipment overview LCD digital display tensile tester (large deformation) is widely used for hardware, metal, rubber and ...
2026-03-01 00:27:01
|
|
...Test Machine EN13823 SBI.pdf Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single ...
2026-10-23 00:06:25
|
|
I.Timken Ring-Block Wear Test Machine ASTM D2782,ASTM D2509 This machine is mainly applied for simulating evaluation for kinds of lubricant, grease's ...
2026-08-22 00:46:22
|
|
... attack on lubricated parts, such as bearings that contain copper or copper alloys. Such corrosion, for example, can cause premature bearing ...
2026-10-23 00:06:26
|
|
CCS Apparent Viscosity Test Machine by Cold Crank Simulator Introduction: Cold Cranking Simulator is used to measure the apparent viscosity of engine ...
2026-10-23 00:06:26
|
|
General Introduction 1.1 Equipment overview Optical cable impact tester is used to detect optical fiber cables to withstand impact capability. By ...
2026-03-06 07:30:17
|
|
Fretting Wear Resistance Tester I. Introduction: Lubricating Grease Fretting Wear Resistance Tester is used to evaluate the anti-fretting wear ...
2026-06-07 00:38:07
|