31 - 40 of 189
corrosion testing machine
Selling leads
|
... to flame test standard NF P92-501. The tester provides 30KW / m2 heat radiation, which may lead to volatile flammable gas sample and ...
2025-07-25 00:13:15
|
|
IEC/ EN 60332-1 Flame Propagation Test Equipment Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
2025-07-25 00:13:15
|
|
Introduction: FRP Flooring Critical Radiant Flux Testing Machine is the cornerstone of the flooring materials reaction to fire tests in the Euroclass ...
2025-07-25 00:13:15
|
|
Introduction This is a fire test for determining values of flame propagation height for electrical and optical-fiber cables that are for installation ...
2024-12-09 21:14:01
|
|
... air is supplied to the box, 24KW radiation illuminance is also provided for the sample. Carry out combustion test on the transformer sample under ...
2024-12-09 21:23:40
|
|
... attack on lubricated parts, such as bearings that contain copper or copper alloys. Such corrosion, for example, can cause premature bearing ...
2025-07-25 00:13:16
|
|
...Test Machine EN13823 SBI.pdf Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single ...
2025-07-25 00:13:15
|
|
CCS Apparent Viscosity Test Machine by Cold Crank Simulator Introduction: Cold Cranking Simulator is used to measure the apparent viscosity of engine ...
2025-07-25 00:13:15
|
|
...-fill insulation materials, carpets, blankets, blocks, plates, prefabricated pipe insulation and some insulation products. The maximun use ...
2025-07-25 00:13:15
|
|
AC and DC High Voltage Dry Type Test Transformer I. Introduction: Dry Type Test Transformer AC DC Hipot Tester is applied in power system for ...
2024-12-09 19:27:52
|