941 - 950 of 1220
water ingress testing equipment
Selling leads
|
...Test Apparatus Product overview: The hot flaming oil test device conforms to IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3. It is ...
2026-09-09 00:25:40
|
|
... laboratory: Through the insulated warehouse and the attached air reprocessing unit, a stable temperature and humidity environment is provided for ...
2026-09-09 00:25:39
|
|
... electrical equipment. The burner which produces the 12 mm high test flame shall consist of a tube at least 35 mm long with a bore of 0.5mm±0.1mm ...
2026-09-09 00:25:38
|
|
...according to IEC 60068-2-11-1981, ISO 9227-2006, and etc. This chamber is designed to test the corrosion resistance of the products on the surface ...
2026-09-09 00:25:40
|
|
... 22.102, 24.102.1, 24.102.2. It is used to test the performance of horizontal and vertical storage type electric water heaters when passing water ...
2026-06-11 18:40:19
|
|
... microcomputer digital LED, and can be set with temperature protection/water shortage and electric heating. It is suitable for the passive ...
2026-06-11 18:46:16
|
|
... 4329, etc., can simulate the damage caused by sunlight, rain and dew. Fluorescent UV lamp was used to simulate the effect of sunlight, and ...
2026-09-09 00:25:40
|
|
...-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is used to simulate that the flammable liquids used in ...
2026-09-09 00:25:40
|
|
...Testing Machines For MCB Impact Resistance Testing Product Information: The test equipment conforms to the standard requirements of IEC 61009-1...
2026-09-09 00:25:38
|
|
...Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts ...
2026-09-09 00:25:38
|