101 - 110 of 125
terminal mechanical stress test apparatus
Selling leads
|
... is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage ...
2026-06-11 18:48:40
|
|
...It is used to test the antenna coaxial socket which is installed on the device and equipped with parts or components which isolate the hazardous ...
2026-06-11 18:52:13
|
|
...is used to test non-detachable parts that protect against access to live parts, moisture or contact with moving parts shall be fixed in a reliable ...
2026-06-11 18:41:53
|
|
... to test non-detachable parts that protect against access to live parts, moisture or contact with moving parts shall be fixed in a reliable manner ...
2026-06-11 18:42:01
|
|
... of wire which confirms to standards UL486A-486B and UL498 SD5.3 test method B, etc. This test machine is used for judging whether the design and ...
2026-09-08 00:29:59
|
|
...Test Machine For Checking Damage Degree Of Wire 2 Stations Product Introductions: This conductors damage degree testing machine is also called the ...
2026-09-08 00:29:59
|
|
...check wear resistance of plug, mobile socket mobile sockets, fixed parts fitted with conductors and their connectors under sheath protection ...
2026-09-08 00:29:58
|
|
...ch is used to test the abrasion resistance of the microwave oven door system, including the structure of the hinge, microwave seal and other ...
2026-09-08 00:29:57
|
|
...so designed that the connected rigid solid conductor remains clamped, even when it has been deflected during normal installation, for example, ...
2026-09-08 00:29:57
|
|
... stress conditions during normal use. Product Overview This testing machinery complies with IEC 60335-2-84 "Household and similar electrical ...
2026-09-08 00:29:59
|