11 - 20 of 48
stainless steel enclosure protection test probe
Selling leads
|
... and other standards. The stick probe is used to verify the protection of personnel from contact with hazardous parts. It is also used to verify ...
2026-06-11 18:48:06
|
|
...verify the protection against access with a wire. Technical parameters: Model SN2210-4 SN2210-4T (Optional) Name Test rod probe D Test rod probe D ...
2026-06-11 18:48:50
|
|
...-Probe for verification” IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” Samples and Restrictions: Household appliances, ...
2026-06-11 18:40:57
|
|
...Test Probe 11 IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings Product Overview: This probe conforms to the standard ...
2026-06-11 18:50:08
|
|
...Test Probe D with 1N Force For IP4X And Shock Hazard Verification This precision test probe conforms to IEC61032 Figure 4 Test Probe D standards, ...
2026-06-11 18:43:58
|
|
...Enclosure Openings Unjointed Test Probe 11 Product Overview: This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.7, ...
2026-06-11 18:50:35
|
|
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect Product information: The joint test probe of figure V.2 is in accordance ...
2026-06-11 18:41:54
|
|
...Stainless Steel Blunt Test Probe Of Figure V.3 Product information: The blunt probe of figure V.3 conforms to IEC 62368-1:2018 clause 5.3.2, 5.4.10...
2026-06-11 18:53:05
|
|
...Enclosures Against Ingress Test Probe 1 Figure 5 Ф50mm Product information: This impact steel ball confirms to IEC 60950-1: 2013 Clause 4.2.5, IEC ...
2026-06-11 18:42:06
|
|
...used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for ...
2026-06-11 18:41:58
|