11 - 20 of 250
single station vehicle testing equipment
Selling leads
|
...Test Apparatus Single Station Overview: This apparatus conforms to UL2054 Clause 22 FIG. 22.1, UL 1642-2009 Clause 20 FIG. 20.1, GB 31241-2014 ...
2026-09-08 00:29:59
|
|
... 11, IEC60065 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.2 etc. Application for Strain Relief Test Apparatus: The device is used ...
2026-06-11 18:45:53
|
|
... motor. It is dropped from a height of 40 mm onto a rigidly supported steel plate having a thickness of at least 15 mm and a mass of at least 15 kg...
2026-06-11 18:41:47
|
|
...;Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c ...
2026-09-08 00:29:59
|
|
... 26.3, figure 19. It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test ...
2026-09-08 00:29:59
|
|
... test requirements of .VW 80000-2017,DIN EN ISO 6270-2, GS95011-4-2004, DIN 50017, etc. It simulates the condensation on electronic modules in ...
2026-06-11 18:48:53
|
|
...Vehicle Charging Interface Cable Bending Test Equipment With Load Product Overview For Vehicle Charging Interface Cable Bending Test Equipment: The ...
2026-09-08 00:29:59
|
|
... with clause 33 of the IEC 62196-1:2022 standard and etc., and meets the test method requirements specified in Section 7.21 of the GB/T 20234.1...
2026-09-08 00:29:58
|
|
... of IEC 61851-1 2017 clause 12.11 and etc. This test equipment is composed of two kinds of impact test apparatuses, and two kinds of mechanical ...
2026-06-11 18:48:45
|
|
... requirements of standards such as IEC 61851-1 2017 Clause 12.11. The test equipment is composed of two kinds of impact test devices. Two kinds of ...
2026-06-11 18:49:07
|