1 - 8 of 8
lamp holder axial force test device
Selling leads
|
... to IEC60598-1 clause 4.4.4 Product Overview For Fluorescent Lamp Holder Axial Force Test Device: It is applicable to axial pressure is applied to ...
2025-07-24 00:13:46
|
|
... test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, ...
2025-07-24 00:13:46
|
|
....5. It used to detect the static load test of wind resistance for street lamps outdoors. The working principle is to use a small sandbag to spread ...
2025-07-24 00:13:46
|
|
...Lamp Wind Force Test Device For Wind Resistance Test Applied Standards For Road Lamp Wind Force Test Device: This machine meets the standards of ...
2025-07-24 00:13:46
|
|
...used for checking the axial strength of the Edison cap. Technical parameters: Samples and restrictions Edison lamp cap Test purpose Used to detect ...
2025-03-06 22:28:31
|
|
...the IEC60598-2-20 clause 20.12.4, Fig 2. Test Principle For Lampholder Copper Contacts Security Thrust Test Device: It is used to check security of ...
2025-07-24 00:13:46
|
|
... the bending moment of a semi-luminaire intended to be connected to a screw or bayonet socket due to its own weight.to Test the bending moment of ...
2025-03-06 22:28:09
|
|
...Test Equipment For Screw Or Lampholders Product Information For Semi-Luminaire Bending Moment Test Equipment: It is conforming to IEC 60598-1clause ...
2025-03-06 22:31:10
|