761 - 770 of 853
ipxxb standard test finger
Selling leads
|
IEC 61009-1 Residual Current Protector Device Action Characteristic Tester System overview: The test equipment conforms to the standard requirements ...
2026-07-06 17:14:34
|
|
...h the requirements of 5.14.1 and 5.14.2 of the standard GB/T15279-2002. It is used to verify the life of the hook spring and the life of the button...
2026-06-11 18:41:28
|
|
...Standard:IEC 62368-1:2018 clause 5.3.2, 5.4.10, V.1.4 and figure V.3, IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3 and UL6500 figure B...
2026-06-11 18:52:51
|
|
...Clause 5.4.1.10 Vicat Softening Temperature Determination Tester Product Information: This test apparatus designed and manufactured according to ...
2026-09-08 00:29:59
|
|
... rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
2026-06-11 18:53:03
|
|
... resistor, category: wire-wound resistors. It is designed and manufactured according the standard requirements of IEC 62368-1:2018 clause 5.4.11 ...
2026-06-11 18:53:05
|
|
...test generator is required by IEC60335-1:2004, IEC60950-1:2005, IEC60065:2005, and etc. The equipment is used to verify transient overvoltage to ...
2026-06-11 18:41:45
|
|
...Standards & Clauses: IEC60745-1:2006clause 24.14 GB2099.1-2008 clause 23.2 GB3883.1-2008clause 24.14 GB4706.1-2005clause 25.15 GB7000.1-2015clause ...
2026-06-11 18:41:50
|
|
... 5 IEC 60598-1-2017 “Luminaries-Part1: General requirements and tests” The spray nozzle is used to verify the protective performance of the ...
2026-06-11 18:47:55
|
|
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect Product information: The joint test probe of figure V.2 is in accordance ...
2026-06-11 18:41:54
|