131 - 140 of 289
iec 60950 flammability test chamber
Selling leads
|
IEC 60529 IP5X/IP6X Walk-In Sand And Dust Test Chamber 24 CBM For EV Charging Station Product Information: Standard: IEC60529:2013 "Degrees of ...
2026-09-08 00:29:58
|
|
IEC 60068-2-11 Salt Spray Corrosion Test Chambers 108L Corrosion-resistant Construction Model and Dimensions: Model SN8810-108L SN8810-270L SN8810...
2026-09-08 00:29:59
|
|
...Test Chamber 1000L Equipment Overview: This dust test chamber is designed and manufactured according to IEC60529-2013 Fig 2, and required by IEC ...
2026-09-08 00:29:58
|
|
IEC 61347-1 Thermal Protection Ballast Heating Test Chamber For Thermally Protected Ballasts Product information: Standard: IEC 61347-1 Annex C figure ...
2026-06-11 18:46:08
|
|
... Y.4.5, etc. The tester is suitable for testing the oil resistance of rubber, plastic enameled wire or insulator. Test method: Immerse the specimen ...
2026-09-08 00:30:00
|
|
...³ Dust Test Chamber IP5X & IP6X For Dry Sand Or Circulating Dust Environments Test Product Overview: The 2m³ Dust Test Chamber is designed in ...
2026-06-11 18:47:06
|
|
IEC 62196-1 Change of Temperature Test Rapid Temperature Change Chamber Product information: This rapid temperature change test chamber is required by ...
2026-06-11 18:48:32
|
|
IEC 60529 IP Code Protection Degrees Comprehensive IPX1~4 Test Chamber Product introduction The waterproof degree test chamber is designed and ...
2026-09-08 00:29:59
|
|
IEC 60529: 2013 IPX1 IPX2 Waterproof Test Chamber With Drip Board LCD Controller Product Information For Waterproof Test Chamber: The equipment is ...
2026-09-08 00:29:59
|
|
...2013 IPX1 and IPX2 requirements. Used to test the physical and other related properties of electrical and electronic products, lamps, electrical ...
2026-09-08 00:29:59
|