61 - 70 of 167
iec62196 3 vehicle testing equipment
Selling leads
|
IEC62196-1:2014 Charging interface vehicle rolling test machine Equipment Introduction: This equipment puts the power supply plug and the vehicle plug ...
2026-09-08 00:29:59
|
|
... 9.34, etc. The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over ...
2026-09-08 00:29:59
|
|
... rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18...
2026-09-08 00:29:59
|
|
...23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories ...
2026-09-08 00:29:59
|
|
...-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC 61851-1:2017 clause 11.6, ...
2026-09-08 00:29:59
|
|
...Test Apparatus Test EV Charging Interface Product Information: This pull force and torque test equipment is used to test the vehicle plugs, and ...
2026-09-08 00:29:59
|
|
... them to specified pull forces and torque loads. Designed and manufactured in compliance with IEC62196-1:2022 clause 25.3 Figure 17 and table 11, ...
2026-09-08 00:29:59
|
|
...,22, IEC60998, IEC60669. IEC61058, IEC60439, EIA-3 64-70 and other standards. It is suitable for the electrical plug-in life, temperature rise test ...
2026-09-08 00:29:58
|
|
...IEC62196-1: 2020 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the ...
2026-09-08 00:29:59
|
|
...Vehicle Non-Rewirable Accessories Flexing Test Apparatus With Load Product Overview: The flexibility testing apparatus is designed and manufactured ...
2026-09-08 00:29:59
|