951 - 960 of 1240
glow wire test equipment
Selling leads
|
... electrical equipment. The burner which produces the 12 mm high test flame shall consist of a tube at least 35 mm long with a bore of 0.5mm±0.1mm ...
2026-09-09 00:25:38
|
|
...according to IEC 60068-2-11-1981, ISO 9227-2006, and etc. This chamber is designed to test the corrosion resistance of the products on the surface ...
2026-09-09 00:25:40
|
|
... of IEC 60811-505, IEC 60811-1-4, VDE 0472 Part 616, and etc. It is applicable for the insulating sheath of the high polymer material, electric ...
2026-06-11 18:50:53
|
|
...-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is used to simulate that the flammable liquids used in ...
2026-09-09 00:25:40
|
|
...Testing Machines For MCB Impact Resistance Testing Product Information: The test equipment conforms to the standard requirements of IEC 61009-1...
2026-09-09 00:25:38
|
|
...Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure ...
2026-06-11 18:49:55
|
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|
|
...Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts ...
2026-09-09 00:25:38
|
|
...; uses the integral intake and automatic ignition system, the combustion time delays 0.1S thus to make sure the sufficient time of gas burning; ...
2026-06-11 18:47:17
|
|
...Test Chamber 1000L Equipment Overview: This dust test chamber is designed and manufactured according to IEC60529-2013 Fig 2, and required by IEC ...
2026-09-09 00:25:40
|