401 - 410 of 426
glow wire test apparatus
Selling leads
|
...Testing Of Enamel Coated Wires Probe length 101.6mm Product Overview: UL 1017 is a safety standard titled “Standard for Vacuum Cleaners, Blower ...
2026-06-11 18:52:06
|
|
... Line-to-line voltage 10~400V adjustable Testing speed 0.33m/s Testing distance 1000±20mm Suitable cores 2-18 Nominal cross-sectional area 0.2~4mm2 ...
2026-09-08 00:29:59
|
|
.... Adopting PLC intelligent control and servo motor drive, it performs reciprocating tensile cycles under load current to detect breakage, wire ...
2026-06-11 18:52:25
|
|
...Cable Testing Equipment introduction: This oxygen bomb (air bomb) aging test chamber conforms to the standard requirements of IEC 60811-1-1 sub ...
2026-06-11 18:49:59
|
|
.... With brass bolts, having a predetermined minimum size of the plug pins. Usage: Please refer to relative standard requirements. Note: Need to ...
2026-06-11 18:49:53
|
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|
|
...-2-82 clause 31, etc. In addition to the functions of the normal salt spray tester, it also combines the function of the alternating (cyclic) salt ...
2026-09-08 00:29:59
|
|
...test apparatus is designed to perform the required flex endurance testing specified in IEC 60884-1:2022, Figure 21, Clause 23.4. It’s used to ...
2026-09-08 00:29:58
|
|
IEC 62368-1 Clause 5.4.1.10 Vicat Softening Temperature Determination Tester Product Information: This test apparatus designed and manufactured ...
2026-09-08 00:29:59
|
|
IEC62196 Electric Vehicle Charging Plug And Socket Misalignment Tester Product Information: This misalignment test apparatus conforms to IEC62196-3 ...
2026-09-08 00:29:59
|