1 - 10 of 58
figure 2 jointed standard test probe
Selling leads
|
...used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for ...
2026-06-11 18:41:58
|
|
... 60529 IP2X. It features an M6 threaded hole at the end of the handle, allowing it to be connected to a force gauge for precise testing application...
2026-06-11 18:43:29
|
|
... by many standards such as IEC60529 for IP3 testing, IEC 60335-1, IEC60065 and etc. This test probe C is intended to verify the protection of ...
2026-06-11 18:42:02
|
|
... by many standards such as IEC60529 for IP4 testing, IEC 60335-1, IEC60065 and etc. This test probe D is intended to verify the protection of ...
2026-06-11 18:42:03
|
|
... of electronic and information technology equipment can be accessed by users. Product Overview This precision safety testing probe fully complies ...
2026-06-11 18:52:26
|
|
...Figure 1 SФ50mm Test Probe A For Hazardous Parts Test Product Overview: It conforms to the standard requirements of IEC 61032 figure 1, IEC 60529 ...
2026-06-11 18:42:01
|
|
...required by IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 ...
2026-06-11 18:41:54
|
|
... requirements of IEC62368-1 Clause 4.8,5.3.2, 8.5.4.3 Figure V.1, UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, ...
2026-06-11 18:52:43
|
|
... clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20.1 &21.1, etc. This probe ...
2026-06-11 18:52:44
|
|
...nd 12.4, IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20...
2026-06-11 18:48:49
|