41 - 50 of 55
figure 2 jointed standard test probe
Selling leads
|
... 22, IEC60335-2-9 clause 22, IEC61032 figure 7 device 11, IEC60884-1, IEC60598-1, IEC60335-1 Clause 22.11, etc. It is used to verify the protection ...
2025-03-06 22:30:42
|
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC ...
2024-12-09 21:32:27
|
|
... 7 test probe 11, etc. Samples and Restrictions: Non-detachable parts of household appliances, electrical accessories, lamps, etc. Application: It ...
2024-12-09 19:27:07
|
|
... figure 16, etc. This probe is intended to verify the protection against to glowing heating elements. Probe Dimension: Probe cone part length (mm) ...
2024-12-09 21:08:53
|
|
...Figure 3 Straight Probe For Testing Of Enamel Coated Wires Probe length 101.6mm Product Overview: UL 1017 is a safety standard titled “Standard for ...
2025-07-01 19:18:47
|
|
...Figure 3 Probe Intended For Use With A Lampholder Rated Between 600V And 100V Product Overview: This probe conforms to UL 496 2013 clause 4.5.2.1, ...
2025-03-06 22:28:18
|
|
...Figure V.4 Wedge Probe Product Information: The wedge probe conforms to the standard requirement of IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.5 ...
2024-12-09 20:37:44
|
|
... V.4, IEC 60950-1 Figure naif2 (S5366) and Naf3 (S5370), BS 60950.1108 / 260 / CD and other standard requirements. Used to test whether the slot ...
2025-03-06 22:32:00
|
|
...Figure V.3 Blunt Probe for Plugs Jacks and Connectors Product overview: Standard:IEC 62368-1:2018 clause 5.3.2, 5.4.10, V.1.4 and figure V.3, ...
2024-12-09 20:37:44
|
|
... rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
2024-12-09 20:39:51
|