1 - 10 of 78
figure 2 jointed probe
Selling leads
|
...required by IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 ...
2024-12-09 20:59:15
|
|
... to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Hemispherical radius (mm) R4.3±0...
2024-12-09 19:45:42
|
|
... to simulate access to hazardous parts by children of 36 months or less. Probe Dimension: Hemispherical radius (mm) R2.8±0.05 Finger probe diameter ...
2024-12-09 19:45:42
|
|
...used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for ...
2024-12-09 21:07:59
|
|
...Figure 3 Straight Probe For Testing Of Enamel Coated Wires Probe length 101.6mm Product Overview: UL 1017 is a safety standard titled “Standard for ...
2025-07-01 19:18:47
|
|
... the protection against to glowing heating elements. Probe Dimension: Probe cone part length (mm) 21.5 (0,-0.05) Probe rod part diameter (mm) Ф30±0...
2024-12-09 19:46:29
|
|
...Figure 14 Test Probe 31 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 31 figure 14, etc. This probe is ...
2024-12-09 19:46:29
|
|
... is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Probe Dimension: Metal ...
2024-12-09 19:45:42
|
|
... of hazardous live parts or hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar ...
2024-12-09 19:45:42
|
|
...61032 Figure 17 Test Probe 43 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 43 figure 17, etc. This ...
2024-12-09 19:46:29
|