311 - 320 of 883
electrical testing spark generator
Selling leads
|
...Tests—Test A: Cold, IDT; IEC 60068-2-2: 1974 Environmental testing for electric and electronic products—Part 2: Test methods—Tests B: Dry heat; IEC ...
2026-06-11 18:46:25
|
|
Pouring Test Apparatus For Test Leakage Volume Of Cookware Complies BS EN 12983-1 Product Information For Pouring Test Apparatus: The design of the ...
2026-09-08 00:29:59
|
|
IEC 62552 Appliance Test Refrigerator Door Open And Close Endurance Testing Machine Product Information For Refrigerator Door Open And Close Endurance ...
2026-09-08 00:29:59
|
|
IEC 60335-2-25 Figure 102 Test Cabinet with Funnel for Microwave Oven Test Product Information: This test cabinet is designed and manufactured ...
2026-06-11 18:42:53
|
|
IEC 61855 Hair Dryer Air Blockage Test Machine For Airflow Blockage And Motor Stall Testing Advanced testing equipment with PLC intelligent control ...
2026-06-11 18:43:54
|
|
Inclined Plane Test Device for Appliance Stability Testing This inclined plane test device enhances stability testing for household appliances, ...
2026-06-11 18:44:03
|
|
...being tested under 11.6kPa (1.68psi). To judge the test result on condition of no explosion, flame, smoke, electric leakage after test. And the ...
2026-06-11 18:44:36
|
|
... electrical equipment. The burner which produces the 12 mm high test flame shall consist of a tube at least 35 mm long with a bore of 0.5mm±0.1mm ...
2026-09-08 00:29:58
|
|
IEC 60065 Clause 12.1.1 Drop Testing Equipment for Audio Video Products Brief Introduction: This drop test device meets the requirements of IEC 60065 ...
2026-06-11 18:41:39
|
|
IEC61032 Figure 3 Protection Verify Test Probe C For Hazardous Parts Test Product information: This probe conforms to standard requirements of ...
2026-06-11 18:42:02
|