751 - 760 of 1320
electrical installation test equipment
Selling leads
|
... Protection Against Water Ingress Testing System Overview: The comprehensive water ingress testing system is used to verify the protective ...
2026-09-09 00:25:39
|
|
... 13.4, IEC60598-1, IEC 60884-1, UL746A and ASTM D3638-92 and etc. It is used for determination of the relative resistance to tracking performance ...
2026-09-09 00:25:38
|
|
..., IEC 60884-1 clause 25.2, 25.3, figure 37, IEC 60669-1 clause 21.3 and 21.4 figure 19, etc. It is used for testing the heat resistance of the ...
2026-06-11 18:52:46
|
|
...Test Apparatus Product Information: This test apparatus is designed and manufactured according to the standard requirements of IEC 62368-1:2018 ...
2026-09-09 00:25:40
|
|
...Test Rod Probe with 1N Force Product information: This probe conforms to the standard requirement of IEC61032 test probe D, required by IEC 62368-1...
2026-06-11 18:52:58
|
|
Glow Wire Test Apparatus Included “inner, Build-in” Fume Hood Product overview: This device is manufactured according to the standard of IEC60695-2-10...
2026-06-11 18:53:20
|
|
IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the ...
2026-06-11 18:53:24
|
|
... by enclosure (IP code)”. It is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, ...
2026-09-09 00:25:38
|
|
..., IPX3and IPX4 IEC 60598-1-2017 “Luminaries-Part1: General requirements and tests” Application: To verify the protective performance of the ...
2026-09-09 00:25:40
|
|
...testing Chamber Product information: Standard: It is suitable for conducting the water spray test as stipulated in the R1/R2/S1/S2 clauses of the ...
2026-09-09 00:25:39
|