621 - 630 of 942
electrical appliance testing probe
Selling leads
|
...Testing Equipment Product information: The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of ...
2026-06-11 18:47:50
|
|
IEC62196-1 Electric Vehicle Connector Pull Force and Torque Test Equipment Equipment introduction: This pull force and torque test equipment is used ...
2026-09-08 00:29:59
|
|
...-1: 2020 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the vehicle ...
2026-09-08 00:29:59
|
|
... to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and ...
2026-06-11 18:48:36
|
|
... rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18...
2026-09-08 00:29:59
|
|
... 22, 23.2, 23.3, fig 15, table 8 and table 9, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories ...
2026-09-08 00:29:59
|
|
...Test Chamber Product Information For Hot Flaming Oil Flammability Combustion Test Chamber: The hot flaming oil test device conforms to IEC60950-1...
2026-09-08 00:29:59
|
|
... Breaking Capacity test machine conforms to the standard requirements of IEC60309-1 clause 20 and clause 21, IEC62196-1 clause 7.11 and clause 7.12 ...
2026-09-08 00:29:59
|
|
...Test Chamber Product information: The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the ...
2026-09-08 00:29:59
|
|
... Article 12.1.4 Figure 8, 12.7.3.5 etc. Usage: The equipment is suitable for drop impact test of equipment shell. Test Samples: Lamps, Audio, Video ...
2026-06-11 18:45:53
|