441 - 450 of 846
electrical appliance impact testing equipment
Selling leads
|
IEC 60335-2-15 Figure 101 Steam Sterilizer Spillage Test Apparatus Product overview: The spillage test apparatus is designed and manufactured ...
2026-06-11 18:41:12
|
|
IEC 62552 4 Stations Automatic Cabinet Door Open And Close Testing Machine Standard: Fully automatic cabinet door open and close testing machine is ...
2026-06-11 18:41:52
|
|
IEC 60320-1 Clause 14.2 Figure B.1 Steam Sterilizer Moisture Resistance Test Apparatus Product information: The spillage test apparatus is designed ...
2026-06-11 18:43:01
|
|
IEC 60335-2-40 Clause 30.101 Figure 105 Ball Pressure Test Apparatus 30mm for weight area Product information: The ball pressure tester conforms to ...
2026-06-11 18:43:13
|
|
BS1363-2 Temperature Rise Test System with Dummy Front Plate Product Description: This advanced Temperature Rise Test System (Model: SN2219-BS) is ...
2026-09-08 00:29:58
|
|
Cold Bend Test Apparatus For Cables ≤Ø 12.5mm IEC60811-1-4 Clause 8.1 And 8.2 Product description: This device is intended in general for cables with ...
2026-06-11 18:43:27
|
|
IEC 61386-1 Clause 10.8 Suspended Load Test Apparatus For Conduit Fittings Product information: The Suspended Load Test Apparatus is designed to ...
2026-06-11 18:44:01
|
|
...Impact Hammer Product Overview: The Spring Hammer (Impact hammer) is made according to the standards of IEC60068-2-63 and IEC60068-2-75. This ...
2026-06-11 18:50:36
|
|
IEC60335 Single Station Motorized Cleaning Heads Free Fall Test Apparatus Equipment introduction: The iron (except for cordless irons) is suspended by ...
2026-06-11 18:41:47
|
|
Creepage And Clearance Test Card IEC 60598-1 For Measured Surface Of The Insulation Product Information: These test gauges conform to IEC 60598-1 ...
2026-06-11 18:42:50
|