701 - 710 of 812
electrical appliance flexing testing equipment
Selling leads
|
...Cable Testing Equipment introduction: This oxygen bomb (air bomb) aging test chamber conforms to the standard requirements of IEC 60811-1-1 sub ...
2026-06-11 18:49:59
|
|
...Bath For PVC Cable Testing With Digital Temp Control & Circulating Pump This stainless steel water bath equipment features electric heating with ...
2026-06-11 18:47:06
|
|
30KW Resistive Load Bank for IEC 62040-3 UPS Test Equipment Overview: This electric energy load testing device is easy to operate, small in size and ...
2026-06-11 18:50:12
|
|
...Testing Product Overview This Pendulum Impact Tester is designed to assess the mechanical resistance of electrical devices under low-energy impact ...
2026-09-08 00:29:57
|
|
...-1:2009, IEC62262:2002 clause 6, IEC60068-2-75, etc. It is used to test the mechanical collision strength degree when the electrical equipment ...
2026-09-08 00:29:58
|
|
... Test Probe Product overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.3, figure V.1 (but straight ...
2026-06-11 18:50:02
|
|
...Test Apparatus Equipment Overview: The Pendulum Impact Test Apparatus is manufactured in accordance with the requirements of IEC60068-2-75, ...
2026-06-11 18:50:33
|
|
...Test Device Equipment overview: The coupler heating test device is designed and manufactured according to IEC60320-1 clause 18.2 and figure 13. It ...
2026-06-11 18:50:11
|
|
...Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure ...
2026-06-11 18:49:55
|
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|