30KW Resistive Load Bank For IEC 62040-3 UPS Test

Browse Categories

Electrical Appliance Testing Equipment(385)
Energy Efficiency Lab(45)
Vehicle Testing Equipment(139)
Battery Testing Equipment(75)
Switch Life Tester(277)
Led Testing Equipment(74)
Water Ingress Testing Equipment(85)
Environmental Test Chamber(110)
Flammability Test Chamber(60)
MCB Testing Machine(24)
Medical Device Testing Equipment(34)
IEC 62368 Test Equipment(73)
Test Equipment For Electric Lab(22)

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86-020-39185976

Contact Person:
Ms.Zoe Zou View Contact Details

30KW Resistive Load Bank For IEC 62040-3 UPS Test

Brand Name	Sinuo
Model Number	SN2117R-30KW
Certification	Calibration Certificate (Cost Additional)
Place of Origin	China
Minimum Order Quantity	1
Price	Customized
Payment Terms	L/C, , T/T, Western Union, MoneyGram
Supply Ability	20 sets per month
Delivery Time	30 Days
Packaging Details	Plywood
Applied Standard	IEC 62040-3 ED 2.0 2005 Annex C
Applied Specimen	UPS
Load Type	Resistive
Load Capacity	30KW
Load Connection	Y
Loading Accuracy	±3%
Cooling Method	Forced air cooling
Control Method	Buttons control

Detailed Product Description

30KW Resistive Load Bank for IEC 62040-3 UPS Test

Equipment Overview:

This electric energy load testing device is easy to operate, small in size and convenient to transport. Depending on the load capacity, multiple units can be used in parallel. The control method is divided into manual button control.

Based on the requirements of IEC 62040-3 ED 2.0 2005 Annex C, figure C.1 and C.2, we have designed the load cabinet as following parts:

A set of resistive load, the resistive load is 30KW, the rated voltage is AC220V/60HZ, at the same time meet the single-phase AC127V/60HZ power supply test, the capacity can also reach 30KW.

Technical Parameters:

System composition	Load cabinet, resistive load, on-site data acquisition, manual load/unload control, electrical control part, heat sink and auxiliary control, etc.
Total discharge power	Resistive 30KW (designed according to three phase 220V/60HZ); at the same time meets 30KW single-phase 127V/60HZ (the current carrying capacity of the neutral line is the sum of the three-phase carrying capacity)
Resistive load binning 30KW total 6 gears	Any adjustment by combinations within 1KW-30KW power range (minimum step 1KW): 1KW, 2KW, 2KW, 5KW, 10KW, 10KW.
Test voltage	Three-phase AC220V/single-phase AC127V Remark: Single and three-phase load test cannot be used at the same time
Test frequency	60HZ
Resistance tube	Each resistance element: insulation resistance above 500MΩ, withstand voltage AC2000V for 1-minute, high temperature resistance
Load characteristics	Resistive load
Contactor	China brand contactor
Breaker	China brand breaker
Heater	Wuxi Zhuxing
Power Factor	1.0
Load connection	Y
Loading accuracy	±3%；
Three-phase balance	The unbalance degree is less than or equal to 3%;
Way of working	Continuously working
Power supply	AC220VAC/60HZ/three-phase four-wire system; (reserved wiring terminals)
Cooling method	Forced air cooling
Way to control	Manual button control
Insulation class	F
Detection function	Real-time display of voltage, current, power, frequency, power factor, etc.
Load protection	Short circuit, over current, high temperature, low air volume and fan failure protection
Fault alarm	There is fan failure, load high temperature alarm
Load cabinet dimensions	L700mm×W800mm×H1000mm (L×W×H), with pulley (height 150MM)
Weight	172KG
Installation location	Indoor

Power supply from test sample: If the power supply from the test sample is three phases, then all the GA, GB, GC and N terminals should be connected to test sample correspondingly (GA+GB+GC+N); if the power supply from the test sample is single phase, then one of the GA, GB, GC terminals plus N terminal should be connected to test sample correspondingly (such as GA+N terminals).

Power supply from mains: the power supply from mains should be three phases AC220V/60Hz, the power supply is for the control components of this load bank. Operator should remove the lower three wires from the lower three terminals, and wrap up them well. Then operator uses the power supply cord we’ve offered to connect to the mains (L1+L2+L3+PE). The load bank must be grounded reliably before use.

Product Tags: 30KW Resistive Load Bank IEC 62040-3 Resistive Load Bank

Related Products

IEC60947-1 Tensile Strength Test Machine With Test Range 50KN Adopts Computer Control for sale


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

30KW Resistive Load Bank For IEC 62040-3 UPS Test

30KW Resistive Load Bank For IEC 62040-3 UPS Test

IEC60947-1 Tensile Strength Test Machine With Test Range 50KN Adopts Computer Control

IEC 60947-1 Double Column Digital Display Tensile Testing Machine For Test Threadless Terminals

ASTM D-412 Dumbbell Test Piece Punching Machine Punching stroke ≥120-150MM

Terminal Stress Tester for Screwless & Threaded Connectors UL486A-B Compliance Device

IEC 60669-1 Switch And Plug-Socket Endurance Tester With 3 Independent Work Stations

IEC 60227-5 Flexing Test Apparatus For PVC Insulated Flexible Cables Testing PLC Control