121 - 130 of 440
charging interface test device
Selling leads
|
..., and it is also used to test the broken cores of PVC insulated cables under load to verify their reliability. Bending Test A sample of vehicle ...
2026-06-11 18:48:43
|
|
IEC60312-1 Figure 29 Vacuum Cleaner Hoses and Connecting Tubes Deformation Testing Device Product Overview: This deformation testing device meets the ...
2026-06-11 18:41:10
|
|
... 8.6.2, 8.6.5, IEC60598-1 clause 4.13.4 (c), IEC60335-1 Clause 20.1, IEC 60950: 2013 clause 4.1, IEC 60065:2014 clause 19.1, etc. The test device ...
2026-06-11 18:52:49
|
|
...evaluating the thermal and mechanical strength of EV charging guns and connectors under high-current conditions. The system delivers precise and ...
2026-06-11 18:48:27
|
|
... or burning damage to the test personnel during the battery overcharge and over discharge testing. The inner chamber is made of stainless steel ...
2026-06-11 18:44:33
|
|
... and restrictions: Medical device boards or devices in oxygen-rich environments 3. Application: It is used for spark ignition test of medical ...
2026-06-11 18:52:41
|
|
...Testing Equipment for Audio Video Products Brief Introduction: This drop test device meets the requirements of IEC 60065 Clause 12.1.1 and etc. It ...
2026-06-11 18:41:39
|
|
... requirements of standards such as IEC 61851-1 2017 Clause 12.11. The test equipment is composed of two kinds of impact test devices. Two kinds of ...
2026-06-11 18:49:07
|
|
...,22, IEC60998, IEC60669. IEC61058, IEC60439, EIA-3 64-70 and other standards. It is suitable for the electrical plug-in life, temperature rise test ...
2026-09-08 00:29:58
|
|
...Test System with Explosion Proof Chamber Product information For Lithium Battery Test System with Explosion Proof Chamber: Battery overcharge and ...
2026-06-11 18:44:49
|