| Equipment size | Test chamber size per layer: 500*500*500 (D*W*H),( Three
zones structure, can be customized. Outer box size: 710*780*2060mm (W*D*H) |
| Equipment Material | Outer box: 1.5MM thick cold-rolled plate and high-temperature
double-sided baking paint treatment. Inner box: SUS # 304 stainless steel, thickness 1.00MM thick. |
| Box load-bearing capacity | The bottom load capacity is not less than 150KG, the second/third
layer load capacity is not less than 50KG |
| Equipment box door | Single door, double door, inner box door is made of stainless
steel, and add silicone strip to tighten, open visual observation
window on the front The door is connected to the box by strong hinges, while each door
adds an explosion-proof hinge, the right end of the chain is fixed
in the latch side to prevent the explosion-proof box and door
separation, effectively protecting the safety of testers |
| Observation Window | Double tempered glass, tempered glass thickness of 10MM, double
tempered glass between the addition of steel wire grid in the
explosion can do traction, while preventing the glass explosion
when the glass splash injury testers situation. Observation window
sealing using 3M glass adhesive for sealing |
| Box protection | The test chamber is fully laminated with Teflon tape inside to
effectively prevent corrosion, insulation, flame retardant and easy
to clean. |
| Wire loading port | Each layer of the box on the left and right sides of each open a
round loading line mouth, Ф50MM diameter, easy to test the
connection line through |
| Exhaust | Each layer of the box back are installed with exhaust fans and
leave the exhaust guide (diameter 100MM), can be connected to the
laboratory powerful extraction fan |
| Lighting | Each layer of the box is installed with lighting device, convenient
to observe the specimen. Individual test panels to control lighting and exhaust in each test
chamber. |
| Heat insulation protection | Insulation design between each layer can avoid mutual influence
test. |
| Weight | Approx 200kg |
| Power supply | AC 220V±10%, 50Hz |
