211 - 220 of 1312
auto electrical test equipment
Selling leads
|
... Testing Equipment Product information: This testing device is required by IEC 62196-1Ed.4CDV 2020 clause 26.3, fig 19. It is used to test the ...
2026-06-11 18:48:31
|
|
IEC 62196-1 Mechanical Tests on Terminals Vehicle Connector Rotation Test Equipment Product information: This mechanical tests on terminals testing ...
2026-06-11 18:48:31
|
|
... for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as ...
2026-09-08 00:29:58
|
|
... test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, ...
2026-09-08 00:29:58
|
|
....2 Clause 3.1 Figure 1, IEC60245-1 clause 5.6.3.1 and etc. It complies with the relevant standard requirements of rubber plastic wires’ and cables’ ...
2026-09-08 00:29:59
|
|
... test requirements of .VW 80000-2017,DIN EN ISO 6270-2, GS95011-4-2004, DIN 50017, etc. It simulates the condensation on electronic ...
2026-06-11 18:48:53
|
|
...Test Equipment With Load Product Overview For Vehicle Charging Interface Cable Bending Test Equipment: The flexibility testing apparatus is ...
2026-09-08 00:29:59
|
|
...used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle is that the ...
2026-09-08 00:29:59
|
|
...Testing Machine PLC Control Standards & Clauses: IEC62196-1: 2014 “Plug, socket-outlets, vehicle connectors and vehicle inlets–Conductive charging ...
2026-06-11 18:48:29
|
|
...Test Equipment Semi-Lamp Curve Operation Test Standards & Clauses: IEC 62560-2015 "Voltage > 50V-safe Fan for constant self-ballasted LED Lamp...
2026-06-11 18:45:52
|