IEC 62196-1 Rewireable Plugs and Vehicle Connector Mechanical Strength Testing Equipment
|
|
IEC 62196-1 Rewireable Plugs and Vehicle Connector Mechanical Strength Testing Equipment
Product information:
This testing device is required by IEC 62196-1:2022 clause 26.3, fig 19. It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle is that the free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both having a total length of 2,25 m, is fixed to a wall at a height of 1 m above the floor. The sample is held so that the cable is horizontal and then it is allowed to fall on to a concrete floor. This is done eight times; the cable being rotated through 45° at its fixing each time.
Technical parameters: 1. The height of dropping: 1000mm 2. Dropping times:8 3. Rotating device:45°, it can be rotated in all sides. 4. Size:L*W*H 2443*360*1132mm
|
| Product Tags: Vehicle Connector Mechanical Strength Testing Equipment Rewireable Plugs Mechanical Strength Testing Equipment |
|
EU&UL standard Auto AC Charging Gun Comprehensive Test System |
|
IEC 62196-1 Programmable Temperature Rising Test System 1000A |
|
Vehicle Charging Gun Comprehensive Test System for GB/EU/UL Standards |
|
IEC 62196-3: 2022 Electric Vehicle Connectors Temperature Rise Test System |
|
UL 2594 Drive Over Tire Load Test System for EV Charging Connectors with PLC Control |
|
UL Standard AC Vehicle Charging Gun Comprehensive Test System |