Guangdong Bell Experiment Equipment Co., Ltd: Contact Us: sales@belltestchamber.com +86 769 2328 0911

Home > Products > Battery Test Chambers >

2 Decks Battery Test Chambers ISO Approved For Temperature Climatic Detection

Browse Categories

Guangdong Bell Experiment Equipment Co., Ltd

City: dongguan

Province/State:guangdong

Country/Region:china

Tel:86-769-23280911

Contact Person:
Mr.Choi View Contact Details

2 Decks Battery Test Chambers ISO Approved For Temperature Climatic Detection

Brand Name	DGBELL
Model Number	BTL-D2-252/BTL-D2-288/BTL-D2-360
Certification	CE/ISO
Place of Origin	China
Minimum Order Quantity	1 Set
Price	Negotiation
Payment Terms	Western Union, T/T, D/P, D/A, L/C
Supply Ability	500 Sets per Month
Delivery Time	Negotiation
Packaging Details	Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual inside.
Keywords	Climatic Test Chamber for Battery Cell
Power Supply	AC 380V 50HZ
Temperature Range	-40ºC — +150ºC
Temperature Fluctuation	±0.3ºC
Cooling Rate	Average 1.0°c/Min Full Rang
Heating Rate	Average 1~3°c/Minute (Non-Linear No-Load)
Temperature Uniformity	≤±2ºC(at No Load, Constant State)

Detailed Product Description

Features

1. Professional explosion-proof pressure relief design.

2. Professional high temperature smoke exhaust design.

3. Rich temperature monitoring and alarm mode.

4. Insulated and heat-resistant inner wall and partition.

5. Water-based and gas fire extinguishing firefighting linkage experience.

6. Design and guidance of sample layout and wiring.

7. Spray cooling water supply and drainage design.

8. Long-term operation of energy saving and consumption reduction design.

9. Consideration of integration with charging and discharging modules.

10. Better temperature uniformity.

11. Consistent low wind speed conditions.

Application

Double-deck High Low Temperature Test Chamber provides a constant high and low temperature environment condition ranges from -40°C to 150°C (Available for customized design). It is widely used to test the thermal performance of various products and components. The two test cabinets work independently, providing high efficiency and performance for laboratory testing. Furthermore, the additional explosion-proof function enables this test chamber to be combined with the charge-discharge test, providing a temperature environment for various battery performance testing.

Features

PLC Control, programmable, remote computer control
Heating System
Refrigeration System
Forced Internal Circulate System
Fume Exhaust System
Explosion-proof System

Standards

IEC 60068-2-1:2007: Low temperature testing
IEC 60068-2-2:2007: High temperature testing
GJB 150.3-1986: High temperature testing
GJB 150.4-1986: Low temperature testing
GB/T 2423.1-2008: Low temperature testing
GB/T 2423.2-2008: High temperature testing
GB/T 31485-2015: Safety requirements and test methods for electric vehicles' power batteries

Performance parameters

Model	BTL-D2-252	BTL-D2-288	BTL-D2-360
Single Cabinet Inner Dimension	W600 X D700 X H600 MM	W800 X D600 X H600 MM	W1000 X D600 X H600 MM
External Dimension	W1300 X D1800 X H1950 MM	W1500H1950D1700 MM	W1740H1900D2100 MM
Structure Mode	An integral structure with upper and lower cabinets.
Temperature Range	-40ºC - +150ºC
Temperature Fluctuation	±0.3ºC
Heating Rate	Average 1~3°C/minute (non-linear no-load)
Cooling Rate	Average 1.0°C/min Full rang (non-linear no-load)
Temperature Uniformity	≤±2ºC(at no load, constant state)
Observation Window	Three-layer vacuum tempered glass
Test Terminal	12 sets of terminals are connected to the test cabinet inside and outside of the chamber
Cooling Mode	Air cooling / Water cooling (Optional)
Compressor	Tecumseh (France)
Controlling Mode	Touch screen programmable control PLC, with USB interface, with RS485 .interface can be connected to computer control, special network control software, convenient remote monitoring, data acquisition
Internal Chamber Material	1.0MM thick SUS304# stainless steel with mirror finish, sprayed with Teflon insulation
External Chamber Material	1.2 MM thick Galvanized sheet, dusting pained with high temperature plasticized coating.
Power Supply	AC380V 50HZ 12KW/14KW/16KW
Safety Protection	Automatic explosion-proof pressure relief device, explosion-proof chain, tri-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc.
Extension Function	Provide communication protocol, able to accompanied use with charge and discharge machine

Use common sense of high and low temperature test chamber

The enclosure of the high and the low test chamber must be grounded during installation. If the high and low temperature test chamber is not grounded, there will be a risk of electric shock in case of leakage.
Do not run the high and low temperature test chamber before it is installed, and make sure that the installation is reliable before performing the test.
If heating samples are placed in the test chamber, please use an external power supply for the sample control power supply, do not use the power supply of this test chamber directly.
The operation of the cabinet will produce a dangerous current, non-professionals should not open the cover of the electric control cabinet.
If the high and low temperature test chamber is not equipped with humidification function, pay attention to the difference in use and requirements when reading the instructions.
When the test chamber is running, various motors and fans are started according to instructions under the control of the controller. Do not touch the components that are temporarily in a static state with your hands to prevent the components from starting suddenly and causing personal injury. It is indeed necessary to approach the rotating parts, please cut off the main power switch and ensure that the protective device is in good condition when working at the place.
It is forbidden to move the test chamber when there is a sample inside, otherwise, the sample may reverse or fall.
Before use, make sure that the high and low temperature test chamber is fixed, the casters are off the ground to adjust the foot to the ground, otherwise, the test chamber will accidentally move when subjected to the external force.

Product Tags: ISO Approved Battery Test Chambers 0.3 Degree Battery Test Chambers 50HZ Temperature Test Chambers

Related Products

2 Decks Battery Test Chambers ISO Approved For Temperature Climatic Detection for sale


From:	Enter your Email please. Your email is incorrect!
To:	Guangdong Bell Experiment Equipment Co., Ltd
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

2 Decks Battery Test Chambers ISO Approved For Temperature Climatic Detection

2 Decks Battery Test Chambers ISO Approved For Temperature Climatic Detection

PLC Control, programmable, remote computer control

Heating System

Refrigeration System

Forced Internal Circulate System

Fume Exhaust System

Explosion-proof System

IEC 60068-2-1:2007: Low temperature testing

IEC 60068-2-2:2007: High temperature testing

GJB 150.3-1986: High temperature testing

GJB 150.4-1986: Low temperature testing

GB/T 2423.1-2008: Low temperature testing

GB/T 2423.2-2008: High temperature testing

GB/T 31485-2015: Safety requirements and test methods for electric vehicles' power batteries

The enclosure of the high and the low test chamber must be grounded during installation. If the high and low temperature test chamber is not grounded, there will be a risk of electric shock in case of leakage.

Do not run the high and low temperature test chamber before it is installed, and make sure that the installation is reliable before performing the test.

If heating samples are placed in the test chamber, please use an external power supply for the sample control power supply, do not use the power supply of this test chamber directly.

The operation of the cabinet will produce a dangerous current, non-professionals should not open the cover of the electric control cabinet.

If the high and low temperature test chamber is not equipped with humidification function, pay attention to the difference in use and requirements when reading the instructions.

It is forbidden to move the test chamber when there is a sample inside, otherwise, the sample may reverse or fall.

Before use, make sure that the high and low temperature test chamber is fixed, the casters are off the ground to adjust the foot to the ground, otherwise, the test chamber will accidentally move when subjected to the external force.

2 Decks Battery Test Chambers ISO Approved For Temperature Climatic Detection

Battery Cell High Speed Nail Penetration Test Equipment 3KN-20KN Pressure

12KW 380V Battery Test Chambers Thermal Abuse According to UL 1642

Battery Short Circuit Tester 100mΩ 500V With Proximity Touch Screen Control

10mm 45m3/Min Walk In Explosion Proof Test Chamber With UL 2580 Standard

Thermal Abuse SUS304 220V Battery Test Chambers with Explosion Proof Lock And Chain