Thermal Abuse SUS304 220V Battery Test Chambers with Explosion Proof Lock And Chain

The heating test of battery thermal abuse test chamber shall be carried out as follows

1.Relevant Standard Test Requirements

Single battery safety test

The heating test is carried out as follows:

• The single battery is charged according to the method of 6.1.3
• Put the single battery into the temperature chamber.
• For lithium-ion batteries, the temperature chamber is increased from room temperature to 130 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining the temperature for 30 minutes.
• For nickel metal cyanide batteries, the temperature chamber is raised from room temperature to 85 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 2h.
• Observe for 1h.

2.Battery Module Safety Test

1) The battery module battery shall be charged according to the method in 6.1.4.​

2)  For lithium-ion batteries, the temperature chamber is raised from room temperature to 130 ° C ± 2 ° C at a         rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 30 minutes.

3)  For nickel metal cyanide batteries, the temperature chamber is raised to 85 ° C ± 2 ° C at room temperature at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 2h.

4)  Observe for 1h.