Custom Battery High Speed Nail Penetration Test Chamber Principle: The core is placed in the test plate, the motor filament
double electric cylinder structure, the pallet of fixed needles,
attached to the beam of the electric cylinder, to do free
descending movement, the speed is controlled by the electric
cylinder, full stroke mechanical positioning, double magnet suction
cut-off (non-elastic collision, full stroke without deceleration,
to the designated position of the core (to avoid the second
pinning), to reach a certain penetration depth, or penetration stay
for a certain period of time, and then push out the steel needle,
or immediately pull out the needle. The data is collected and
transmitted to the computer through the voltage sensor installed on
the temperature sensor of the core to determine whether its
performance is qualified. Model | BE-9002KS | Inner Box Size | W850xH1200xD750mm | Outer Box Size | W1400xH2900xD1280mm | Inner Box Material | 304# sand surface stainless steel plate, thickness 2mm | Outer Box Material | Cold-rolled steel baking paint treatment, thickness 1.2mm | Pressure Range | 3KN-20KN | Force Resolution | 1/10000 | Pressure accuracy | ±0.5%RDG | Stroke | 800mm precise mechanical positioning | Displacement Competition Degree | ≤±0.1mm | Needling Speed Range | 50mm/s-550mm/s | Use of Power | AC 220V 50HZ 6KW | Cut-off Conditions | Displacement can only be cleared at the mechanical source point,
set the stroke, pressure, deformation, voltage cut-off. | Drive Mode | Servo motor driven ball screw, double electric cylinder results. | Control Mode | Special control software + PC control | Steel Needle | Φ3mm steel needle 100mm long 30pcs | Data Acquisition | Integrated displacement, force, speed, 4-channel temperature,
1-channel voltage, time: curve display, output | Data Format | EXCEL/CSV | Safety Measures | Pressure relief system, smoke exhaust system. |
|
