IEC 62133-2017 Thermal Abuse Test Chamber For Battery Cell

Thermal Abuse Test Chamber for Battery Cell

Standards

1. IEC 62133-2017

2. UL 1642

3. GB 31241-2014

Main technical parameters

The heating test of battery thermal abuse test chamber shall be carried out as follows

A: Relevant standard test requirements

Single battery safety test

The heating test is carried out as follows:

1. The single battery is charged according to the method of 6.1.3

2. Put the single battery into the temperature chamber.

3. For lithium-ion batteries, the temperature chamber is increased from room temperature to 130 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining the temperature for 30 minutes.

4. For nickel metal cyanide batteries, the temperature chamber is raised from room temperature to 85 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 2h.

5. Observe for 1h.

B: Battery module safety test

1. The battery module battery shall be charged according to the method in 6.1.4.

2. For lithium-ion batteries, the temperature chamber is raised from room temperature to 130 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 30 minutes.

3. For nickel metal cyanide batteries, the temperature chamber is raised to 85 ° C ± 2 ° C at room temperature at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 2h.

4. Observe for 1h.