41 - 49 of 49
residual chlorine sensor cs4
Selling leads
|
... Controller Measuring PH ORP Chlorine For Pools Product Introduction For swimming pools, water parks and other occasions, the detection of residual ...
2024-12-09 20:08:54
|
|
... adsorption of the membrane and the electrochemical response caused by concentration differences. The following are its main principles: Selective ...
2026-09-08 00:23:02
|
|
.... The water quality sonde is non-membrane-covered, amperometric potentiostatic 3-electrode system. Sensors without membranes are less susceptible ...
2024-12-09 20:08:54
|
|
... is amperometric 2-electrode system with surfactant-resistant membrane. The interference of the measurement is O3, Cl2 does not interfere. The size ...
2024-12-09 20:08:54
|
|
...multiplying rapidly, and the residual chlorine is consumed too quickly, the water quality is easy to deteriorate, and the water age is too long, ...
2026-09-08 00:23:02
|
|
... but not limited to PH, ORP, conductivity, salinity, TDS, dissolved oxygen, turbidity, MLSS, transparency, COD, TOC, residual chlorine, ammonia ...
2024-12-09 20:08:54
|
|
... treatment, automatic control dosing of circulating water, swimming pool water disinfection control, RO influent dechlorination control and ...
2024-12-09 21:12:42
|
|
... can not only measure the pH and ORP value of water quality, but also measure conductivity, dissolved oxygen, COD, chlorine, etc. When you want to ...
2024-12-09 20:08:54
|
|
... water bodies. It can detect the disinfection ozone effect of water bodies after adding medicines, or control the residual amount of disinfectants ...
2024-12-09 20:08:54
|