IP66 Water Quality Transmitter RS485 Ozone Measurement Instrument

Fast Response Disinfectant Ozone Analyzer RS485 Temperature Compensation Sensor IP66

Daruifuno’s ozone analyzer ADS2-U3-OZ10 is widely used in a variety of industries that need to disinfect water bodies. It can detect the disinfection ozone effect of water bodies after adding medicines, or control the residual amount of disinfectants in water. The ozone controller is compatible with all DRFN membrane-covered ampere current ozone sensors. The OZ10 sensor has a faster response, T90 is about 15seconds.
 
 
Product Advantages
 

The protection level of the Ozone controller is IP66, which can effectively isolate the pollution and corrosive gas intrusion from the external environment.

The Ozone meter is equipped with a two-wire RS485 interface, the communication protocol is MODBUS RTU.

Users can use the operation panel on the front of the controller to calibrate the sensor and set various parameters that need to be output.

The screen uses a 128*64 black and white graphic dot matrix screen, and the display backlight provides constant light and energy-saving mode selection. The languages include at least Chinese and English.

The ozone controller can record the user's maintenance details of the equipment, the calibration effect of the diagnostic sensor, and will give corresponding prompts for inaccurate calibration instruments.

The meter supports a variety of installation methods and can be applied to more different installation environments.
 
 
Applications Of The Ozone Analyzer

Water plant disinfection process and chlorination control, pipe network and secondary water supply water quality safety monitoring;

Disinfection process control for water production in food, beverage, dairy and pharmaceutical production processes;

Other occasions for ozone disinfection of water.
 

Parameters Of The Ozone Analyzer
 

 

 
Matching Ozone Sensor Parameters
 

• PH range: 2~11
• Pressure range: 0~1 bar, no pressure surges and/or fluctuations
• Temperature range: 0~45 ℃ (no ice crystals in water)
• Response time: T₉₀ approx. 15s.
• Flow rate: approx. 30 l/h, low flow-dependence
• Sensor with automatic temperature compensation
• Material: PVC, semipermeable membrane for mA-version 2-pole terminal
• Calibration: at the controller, analytical determination by DPD-method