Patent Cert Automatic Folder Gluer Stitcher Machine / Cardboard Stitching Machine

Full Servo Control High Speed Automatic Folder Gluer Stitcher Machine Cardboard Gluing and Stitching Machine SP-GZD2400

GENERAL FEATURES

This machine is composed of eight parts: feeding part, glue unit, folding part, correcting part, nail head part, turnover part, count pushing part, automatic strapping part (optional) and electrical system. Each working site is equipped with a separate motor and operating platform, the operation more convenient and faster. The machine adopts PLC control, control the number of cartons and the number of hours. In the side of the machine is equipped with safety alarm device, in case of error operation will automatically alarm.

MAIN PARAMTERS

Feeding unit

1. Leading edge feeding with vacuum suction, which guarantee feeding more stable.
2. Left and right baffle with a linear guide, high-precision displacement
3. With an independent remote control adjustment platform and positioning knife, positioning accuracy;
4. Using Taiwan or through Hong Pu Pu-HTB multi-stage high-pressure fan, paper feeding stability, high efficiency and stability;
5. The left and right sides of the paper feeding baffle can be adjusted automatically according to the width of different paperboard;
6. The front of feeding unit with two paperboard feeding knife, according to different thickness of cardboard up and down can be adjustment;
7. The back part of the paper feeding part is provided with a supporting paper roller and a rear side positioning;

Gluing Section

1. The gluing width is 20-35mm, it’s bottom gluing.
2. Gluing section can be adjusted to left or right according to the cardboard size through with the lead screw roller controlled by motor.
3. The stainless steel wheel adopted for glung, can glue evenly, no faults and saving the glue.
4. The glue quantity can be set according to adjust the gap between glue block and gluing wheels, can save the glue.

Folding Unit

1. Cardboard is mainly through two 90mm wide bottom belt and two 90mm wide bending belt and two folding catheter to achieve the left and right sides of the second fold line and the fourth fold line of 180 degrees of the fold forming;
2. A plurality of supporting bearings are arranged below the belt so as to support the guiding belt to run smoothly;
3. The down belt is equipped with positioning on both sides of the track to ensure that high-speed belt does not fall off;
4. The size of the seam control: left and right on the board with a set of position guide wheel positioning system, the next round drive molding to ensure that the carton forming accuracy and the beauty of both sides, as following photo 3:
5. The belt under the folding section is 6.5 meters long, which ensures the carton forming has more advantages.
6. Track the use of precision linear guide, high precision, durable, as photo 4;
7. When the cardboard enters, it will be sucked by the vacuum on the lower belt, so as to ensure that the cardboard is tightly adsorbed on the lower belt. The high speed is very stable and the carton forming precision is high.

Correction section unit

1. The belt can be adjusted according to the length of the carton to ensure that the belt does not beat when the beat, beat no resistance;
2. Beat the Department of the use of servo motor, speed fast, accurate;
3. left and right wheels use of chrome-plated metal wheels, long life;
4. The system will automatically shut down to avoid waste into a piece of cardboard boxes to reduce downtime:

Stitching unit

1. Nail head can be put 1100 nails per minute;
2. According to the set nail from the pendulum swing adjustable;
3. Nail head with manual refueling system can be set according to demand;
4. Using precision automatic control wire feeding system, to ensure stable wire feeding, no wire automatic shutdown:

Counter Ejector

1. Humanized tilting conveying structure, is easy to operate can reduce the labor strength.
2. Pneumatic front baffle with the reciprocate push rod design can make the ejecting more accuracy and fast.
3. The belts used for conveying the boxes, stacking neatly and stacking speed is 0-130m/min
4. Pneumatic counting and ejecting, it’s very stable, correct and fast.
5. Bottom conveying belts and upper pressure belts synchronously pressing system adopted for the conveying section, to ensure the finished boxes glued fastness, neatly and ejected in order, the stacking height is 8-25 pcs.

About Us

Toprint is located in Shishan Town, Nanhai District, Foshan City, a Pearl River Industrial Area with strong industrial
foundation and complete processing. We have accumulated a lot of experience and technology in the process of
production and serving customers, we are familiar with each industrial production process, takes this as the technical
basis, and the continuous investment on R & D, in line with the principle of Honesty & Pragmatism, Continuous
Innovation, Strengthening Management, Consummating Service, Quality First, Brand Oriented, to Serve the all
customers.