Aluminum Manual Plastic Pipe PPR PVC PE Pipe Cutter With OEM Available

High Quality Aluminum manual Plastic Pipe PPR PVC PE Pipe tube Cutter with OEM available
 
Plastic pipe cutter description:
Scissors are not surprising, but they are versatile. When tools such as knives and shovel do not work well, shears can be easily solved. Scissors have become an indispensable tool in people's daily production and life.
Generally, the material of the knife body is made of aluminum alloy, which makes it light and handy. The blade is 65MN, stainless iron, SK5, etc. The hardness is between 48-58 degrees. The blade is quenched at high temperature. Generally, hand tools are consumables between 1 and 3years.

When cutting PVC pipe, it's important to get a clean, straight cut in order to make a strong weld.
We are your correct choice, thanks.

 
Specifications
Using SK5/65Mn blade, sharp cutting
1) High hardness
2) Tough
3) Self-locking ratchet design, it will not bounce when cutting, safer
4) The safety lock at the rear of the handle prevents accidental injury
5) Replaceable blade
6) Handle curve design, comfortable grip
7) Surface spray color can be customized
8) There is a large amount of inventory, support express delivery
9) Support OEM brand customization
10) 63mm labor-saving cutter, SK5 steel blade, Teflon anti-rust and anti-corrosion coating
11) Self-locking ratchet, cutting more labor-saving



Advantages
1) Pipe cutter with special heat treatment for each of our blade we make, gives our blade the perfect hardness for longer usage.
2) Our special girding on our blades makes more shaper (no burrs) and durable. Equally alignment on each of blade makes the straight cut on the pipes.
3) We polish each of our blades carefully to eliminate the liners on the blade surface, which makes the blade more smooth and durable.
4) Strict quality control: we test our blades with latest hi-tech equipment to make sure the hardness of the blade meet our standard.
 
Attention
When product used in winter, the pipe would be put in the lukewarm water for heating at first to avoid burst because for cold and fragile at cutting. If the edge of cutter appeared wear and tear at using, loose the fixed screw and buy the same type of pipe blade for change after using, we should push down the handle and spread on rustproof oil. Product apply to rigid plastic pipe or aluminum plastic pipe, but not to be applied on electric cable line and steel pipe to avoid to cause cutter damaged seriously.
 
Note
When cutting hoses/thin tubes with this tube cutter, it is recommended to reserve a length of at least about 40mm on both sides to make the stress points even, so as to avoid inclining the cutting surface or deforming the tube.
Instructions for use
1) Open the handles by releasing the lock at the handle ends.
2) When cutting detail, squeeze and release the movable handle several times until the detail is cut.
3) After use, close the working blade completely by squeezing and releasing the movable handle, lock the connected handles.

What's the rotary pipe cutters?
Rotary pipe cutters are the best manual cutters for ductile iron and a great option for steel pipe. With good leverage from the tool's long handle, pipe snaps off squarely before wheel penetrates halfway through pipe. Rotary pipe cutters have heavy-duty frames.

How to use rotary cutter?
Place the rotary cutter on the pipe. And hand tighten the screw assembly. Make sure it is snug but not tight. Begin by rotating the cutter in the direction of the arrow one revolution around the pipe

Which direction do you turn a pipe cutter?
Open the cutter by turning the feed handle counter clockwise and place the cutter on the solidly held pipe so that the rollers are in contact with the pipe. Turn the screw handle clockwise until the cutter wheel makes contact with the pipe.

Which type of pipes can be cut easily using pipe cutter?
We will explore some of the most common types of pipe cutter and their uses further on in this guide, but as an overview, some of the primary materials that pipe cutters can cut include the following: Plastic pipes. Copper pipes. Steel pipes.

What is a pipe cutter used for ?
Pipe cutters are tools used for slicing or cutting pipes. They are commonly used by plumbers due to their reliability and efficiency. In addition to providing clean, professional-quality cuts, pipe cutters are often more convenient, fast, and easy to use than alternatives such as hacksaws.

FAQ 
Q1: Why choose us?
We are a professional manufacturer of pipe hot melt welding machine and pipe scissors.
Q2: Do you provide samples?
Yes, we could offer the sample for free of charge but freight is not included.
Q3: How long is your delivery time?
Generally it’s 3-7days if the goods are in stock, or it’s 25-30days if the goods are not in stock, and it vary a little according to quantity.
Q4: What is your terms of payment?
A: Payment under USD1,000, 100% T/T in advance.
B: Payment more than USD1,000, 30% T/T in advance, balance before shipment.
Q5: What is your packing?
A: usually by carton, and can be packed as your require.