361 - 370 of 426
rt 2 layer board
Selling leads
|
...Layer High Frequency PCB Made on Rogers 60mil RT/duroid 6035HTC With Green Mask for High Power RF Amplifiers (Printed Circuit Boards are custom...
2026-05-27 18:50:36
|
|
...Board (PCB) Made on S1000-2M With Immersion Gold and 90 Ohm Impedance Control (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-29 14:59:24
|
|
... of bluetooth audio adapter. It's a 4 layer board at 1.60 mm thick with 1oz outer layer and half ounce inner layer. White silkscreen over matt ...
2026-05-29 14:59:27
|
|
...Layer Hybrid PCB Made On 12mil 0.305mm RO4003C and FR-4 for Satellite Antenna Today we’re introducing a type of 6-layer RF PCB built on 12mil ...
2026-05-27 18:54:34
|
|
... precise dimensions with a tolerance of +/- 0.15mm. The minimum width for traces and spaces is 7/7 mils, allowing for intricate pattern and design ...
2026-05-27 18:52:09
|
|
...layer) rigid PCB is built with Rogers TMM10i, an isotropic thermoset microwave composite optimized for high-reliability RF and microwave applicatio...
2026-05-27 18:51:15
|
|
...-reinforced PTFE laminate, this rigid PCB features a 0.3mm finished board thickness and reliable EPIG surface finish, paired with 1oz outer-layer ...
2026-07-28 18:29:11
|
|
... is a type of 2-layer rigid circuit board. The board dimensions are specified as 76.88mm x 72.64mm, with a tolerance of +/- 0.15mm. The minimum ...
2026-05-27 18:51:53
|
|
...layer rigid printed circuit board (PCB) fabricated using TSM-DS3—a ceramic-filled reinforced material containing approximately 5% fiberglass—with ...
2026-06-09 10:10:59
|
|
...layer Rogers CuClad 250 rigid PCB is a high-performance microwave circuit board engineered for low-loss RF and high-frequency microwave application...
2026-07-28 18:29:08
|