601 - 610 of 734
ro3010 rf pcb board
Selling leads
|
This high-performance 2-layer PCB is constructed with Rogers RT/duroid 6006—a ceramic-PTFE composite engineered for electronic and microwave ...
2026-04-13 05:31:19
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-04-13 05:31:19
|
|
Double Layer Rogers PCB Built on 16.7mil RO4003C LoPro Reverse Treated Foil for Routers, Servers etc. RO4003C LoPro laminates use a proprietary Rogers...
2026-04-13 05:31:19
|
|
Today, we'll discuss high-frequency PCBs built on DiClad 880 substrates. Rogers DiClad 880 laminates are PTFE-based composites reinforced with woven ...
2026-04-13 05:31:19
|
|
...reference) 1.1 General description This is a type of fast lead time required multilayer PCB built on FR-4 substrate with Tg 150°C for the ...
2026-04-13 05:31:19
|
|
...PCB On 1.0mm Epoxy Glass ITEQ FR-4 2 Layer Circuit Board for USB Charger 1.1 General description This is a type of 2 layer printed circuit board ...
2026-04-13 05:31:19
|
|
... substrate for the application of codec equipment. It's 2.0 mm thick with white silkscreen on green solder mask and immersion gold on pads. The ...
2026-04-13 05:31:19
|
|
...PCB 0.6mm HASL PCB FR-4 Double-Sided Circuit Board for Switch Sensor 1. General description This is a type of 2 layer printed circuit board built ...
2026-04-13 05:31:19
|
|
...Introduction This is a type of single sided circuit board built on FR-4 substrate with CTI 600V. It is a 2.0mm thick PCB with simple tracks, green ...
2026-04-13 05:31:19
|
|
...Board (PCB) Made on S1000-2M With Immersion Gold and 90 Ohm Impedance Control (Printed Circuit Boards are custom-made products, the picture and ...
2026-04-13 05:31:19
|