201 - 210 of 277
polyimide flexible printed circuit board
Selling leads
|
...the outer layers, a final board thickness of 1.5mm, and a via plating thickness of 20 μm, this PCB delivers consistent electrical performance and ...
2026-05-27 18:53:25
|
|
...printed circuit board (PCB) fabricated using TSM-DS3—a ceramic-filled reinforced material containing approximately 5% fiberglass—with an Immersion ...
2026-06-09 10:10:59
|
|
... substrate.It is a double layer build-up with large area of immersion gold and partial green solder mask. Finished copper 1oz are on both sides. ...
2026-05-28 07:30:16
|
|
... ceramic polymer substrate material, the board features a standard finished thickness of 0.6mm and 1 oz (1.4 mils) outer-layer copper weight. It ...
2026-08-20 15:20:59
|
|
... Tg FR-4 With Immersion Gold (Printed circuits boards are custom-made products, the picture and parameters shown are just for reference) 1.1 ...
2026-05-29 14:59:25
|
|
PTFE High Frequency PCB On DK2.2 Dual Layer Cheap RF PTFE PCB for Couplers (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-27 18:53:29
|
|
Rogers High Frequency PCB Built On RO4730G3 20mil 0.508mm DK3.0 With Immersion Gold for Cellular Base Station Antenna (Printed Circuit Boards are ...
2026-05-27 18:50:27
|
|
4 Layer High Frequency PCB Built On 6.6mil and 20mil RO4350B with Blind Via for Radar Sensor (Printed circuit boards are custom-made products, the ...
2026-05-27 18:54:32
|
|
...PCB 0.4mm Multilayer FR-4 PCB With Immersion Gold for GPS Module 1.1 General description This is a type of 4 layer printed circuit board built on ...
2026-05-27 18:53:52
|
|
Rogers TMM4 Microwave Printed Circuit Board 15mil 20mil 25mil 30mil 50mil 60mil With Immersion Gold (PCB's are custom-made products, the picture ...
2026-05-27 18:50:31
|