91 - 100 of 462
pcb substrate copper laminate
Selling leads
|
... of spacer. It's 1.6 mm thick without silkscreen, without solder mask, without copper pattern and surface finish. The base material is from ITEQ ...
2026-04-13 05:31:19
|
|
...PCB DK4.5 with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) General Description ...
2026-04-13 05:31:19
|
|
... constant of 10.2+/- .30 at 10 GHz/23°C and a dissipation factor of 0.0022 at the same frequency and temperature, precise signal transmission is ...
2026-04-13 05:31:19
|
|
... PCB measures 170mm x 90mm with a tolerance of +/- 0.15mm and the minimum trace width and spacing are 4 mils (0.1mm). The overall thickness of the ...
2026-04-13 05:31:19
|
|
AD250C is a glass-reinforced, PTFE-based composite engineered to deliver a stable dielectric constant, low signal loss, and excellent passive ...
2026-05-20 09:01:03
|
|
...printed circuit board (PCB) fabricated with TLX-8 high-frequency laminate, featuring a 30mil (0.762mm) board thickness, 1oz copper weight, ...
2026-04-13 05:31:19
|
|
...PCB Built On Polyimide with 2 oz Copper and Immersion Gold for Industrial Control (Flexible printed circuits are custom-made products, the picture ...
2026-05-10 07:30:12
|
|
...PCB that utilizes the AD350A substrate. The AD350A substrate is a specialized material made of woven fiberglass reinforced, ceramic filled, PTFE...
2026-04-13 05:31:19
|
|
... circuit board substrate. With a higher ratio of fiberglass reinforcement to PTFE content, DiClad 527 provides a wider dielectric constant (Dk) ...
2026-04-13 05:31:19
|
|
...-line and microstrip applications. This ceramic, hydrocarbon, thermoset polymer composite combines the mechanical and chemical advantages of ...
2026-04-13 05:31:19
|