541 - 550 of 721
multilayer fr4 pcb board
Selling leads
|
This is a 2-layer rigid PCB fabricated with high-performance RF-grade material RF-30A, which is engineered with an advanced resin system and optimized ...
2026-04-21 13:33:16
|
|
This PCB is a two-layer rigid PCB fabricated using Rogers RT/duroid 6002, a ceramic-filled polytetrafluoroethylene (PTFE) microwave laminate ...
2026-04-21 13:33:20
|
|
This is a 2-layer rigid PCB fabricated from Rogers RT/duroid 5870, a high-frequency glass microfiber-reinforced PTFE composite. Optimized for ...
2026-04-21 13:33:19
|
|
This PCB is a double-sided rigid type fabricated with Rogers TMM10 thermoset microwave material, which integrates PTFE and ceramic substrate ...
2026-04-21 13:33:19
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-04-13 05:31:19
|
|
Double Layer Rogers PCB Built on 16.7mil RO4003C LoPro Reverse Treated Foil for Routers, Servers etc. RO4003C LoPro laminates use a proprietary Rogers...
2026-04-13 05:31:19
|
|
Brief Introduction TB-73 high-temperature resistant and high-frequency Polyimide copper-clad laminates are designed to withstand high temperatures and ...
2026-04-13 05:31:19
|
|
Today, we'll discuss AD250C, a commercial microwave and RF laminate material designed with low and tightly controlled dielectric constant. AD250C ...
2026-04-13 05:31:19
|
|
Today, we'll discuss high-frequency PCBs built on DiClad 880 substrates. Rogers DiClad 880 laminates are PTFE-based composites reinforced with woven ...
2026-04-13 05:31:19
|
|
Today, we will be discussing Rogers' AD255C antenna grade laminate and the printed circuit boards built using this antenna material. AD255C copper ...
2026-04-13 05:31:19
|