171 - 180 of 239
laminates pcb
Selling leads
|
... are just for reference) General description This is a type of 4 layer flexible printed circuit for the application of Wireless Intercom at 0.2mm ...
2026-05-29 15:00:06
|
|
... of flexible printed circuit with stainless steel stiffener on the top side. It’s for the application of Frequency Generator. It’s a single layer ...
2026-05-29 15:00:05
|
|
...just for reference) General description This is a type of flexible printed circuit for the application of antenna. It’s a 2 layer FPC at 0.2mm ...
2026-05-29 15:00:05
|
|
...PCB on Polyimide With Immersion Gold and 3M Tape and PI Stiffener Supplied Mass Production (Flexible printed circuits are custom-made products, the ...
2026-05-29 15:00:04
|
|
...PCB With Immersion Gold and Green Solder Mask for Chip Testers (Printed Circuit Boards are custom-made products, the picture and parameters shown ...
2026-05-27 18:50:44
|
Rogers TMM3 High Frequency Printed Circuit Board 15mil 30mil 60mil DK3.27 RF PCB With Immersion Gold
|
...just for reference) General Description Rogers' TMM3 high frequency laminates are ceramic, hydrocarbon, thermoset polymer composites designed ...
2026-05-27 18:50:46
|
|
... 75mil DK6.0 RF PCB With Immersion Gold (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) ...
2026-05-27 18:50:46
|
|
... 12.85 RF PCB With Immersion Gold (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) ...
2026-05-27 18:50:47
|
|
... Introduction Rogers IsoClad 917 laminates are non-woven fiberglass/PTFE composites using a low ratio of fiberglass/PTFE to achieve the lowest 2.17 ...
2026-05-27 18:54:27
|
|
...PCB Built on RT/Duroid 6002 10mil 0.254mm DK2.94 With Immersion Gold for Phased Array Antennas (Printed Circuit Boards are custom-made products, ...
2026-05-27 18:50:25
|