331 - 340 of 453
laminated copper sheet pcb
Selling leads
|
...shown are just for reference) General Description Rogers' TMM13i thermoset microwave laminates are ceramic, hydrocarbon, thermoset polymer ...
2026-04-13 05:31:19
|
|
Rogers PCB Built on Kappa 438 20mil 0.508mm DK 4.38 with Immersion Gold for Carrier Grade WiFi (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
...60mil 30mil 20mil Antenna PCB with Immersion Gold, Silver and Tin (Printed Circuit Boards are custom-made products, the picture and parameters ...
2026-04-13 05:31:19
|
|
... shown are just for reference) General Description RO4534 High Frequency Laminates are ceramic-filled, glass-reinforced hydrocarbon based material ...
2026-04-13 05:31:19
|
|
... Introduction Rogers IsoClad 917 laminates are non-woven fiberglass/PTFE composites using a low ratio of fiberglass/PTFE to achieve the lowest 2.17 ...
2026-04-13 05:31:19
|
|
...PCB Built on RT/Duroid 6002 10mil 0.254mm DK2.94 With Immersion Gold for Phased Array Antennas (Printed Circuit Boards are custom-made products, ...
2026-04-13 05:31:19
|
|
... shown are just for reference) Rogers RT/duroid 6002 microwave material was the first low loss and low dielectric constant laminate to offer ...
2026-04-13 05:31:19
|
|
... Frequency PCB Built on RT/Duroid 6010 With Immersion Gold for Ground Radar Warning Systems (Printed Circuit Boards are custom-made products, the ...
2026-04-13 05:31:19
|
|
... PCB With immersion Gold For Direct Broadcast Satellites (Printed Circuit Boards are custom-made products, the picture and parameters shown are ...
2026-04-13 05:31:19
|
|
...Frequency PCB For Microstrip Patch Antennas (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for ...
2026-04-13 05:31:19
|