31 - 40 of 218
iso9001 hdi printed circuit boards
Selling leads
|
The Taconic TLF-35 RF Printed Circuit Board is a custom-made product that provides high-frequency capabilities for a variety of commercial microwave ...
2026-05-27 18:54:07
|
|
Today, we are happy to share our newly shipped PCB based on RO3010 materials. 1. RO3010 Introduction: Rogers RO3010 laminates are advanced circuit ...
2026-05-27 18:52:05
|
|
PTFE High Frequency PCB Built on 2oz Copper 1.6mm Thick With Immersion Gold for Duplex Polytetrafluoroethylene (Short for PTFE), commonly known as ...
2026-05-27 18:53:33
|
|
Today, we'll discuss high-frequency PCBs built on DiClad 880 substrates. Rogers DiClad 880 laminates are PTFE-based composites reinforced with ...
2026-05-27 18:50:58
|
|
Introducing our 2-layer rigid PCB, utilizing Rogers RO3010 ceramic-filled PTFE composites as the substrate. This PCB is designed to provide high...
2026-05-27 18:51:00
|
|
Today, we are delighted to share our newly shipped PCB--based on 20mil RF-35TC high frequency lamnates. The RF-35TC PCB takes center stage as a ...
2026-05-27 18:52:02
|
|
4 Layer Hybrid PCB Built On 8mil 0.203mm RO4003C and FR-4 for Phased Array Antennas (PCB’s are custom-made products, the picture and parameters shown ...
2026-05-27 18:54:01
|
|
... of track width, track gap below 4 mil, pad diameter is not more than 0.35 mm. We call this kind of multi-layer PCB production method as HDI ...
2026-05-27 18:54:35
|
|
Blind Via PCB Built on Tg150℃ FR-4 With Immersion Gold 4-Layer FR-4 Circuit Board (Printed circuits boards are custom-made products, the picture and ...
2026-05-27 18:54:37
|
|
High Tg Printed Circuit Board (PCB) Built on 1.6mm TU-872 SLK Sp (Low DK FR-4) With Immersion Gold (Printed Circuit Boards are custom-made products, ...
2026-05-27 18:53:55
|