181 - 190 of 269
immersion silver two layer pcb
Selling leads
|
...just for reference) General description This is a type of flexible printed circuit for the application of antenna. It’s a 2 layer FPC at 0.2mm ...
2026-04-13 05:31:19
|
|
...PCB on Polyimide With Immersion Gold and 3M Tape and PI Stiffener Supplied Mass Production (Flexible printed circuits are custom-made products, the ...
2026-04-13 05:31:19
|
|
Dual Layer Rogers PCB Built on 10.7mil RO4350B LoPro Reverse Treated Foil WIth Immersion Gold for RFID tags (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
...) General description This is a type of 4 layer flexible printed circuit for the application of Electronic Counter. The base laminate is from ITEQ, ...
2026-04-13 05:31:19
|
|
...Layer Flexible Circuit FPC Flex PCB 0.15mm thick with Immersion Gold (FPC’s are custom-made products, the picture and parameters shown are just for ...
2026-04-13 05:31:19
|
|
...Layer Flexible PCB Built On Transparent PET with Immersion Gold and PI Stiffener for Automobile Sensor (Flexible printed circuits are custom-made ...
2026-04-13 05:31:19
|
|
...PCB 10 Layers 10-layer Quality Circuit Board Built on High Tg FR-4 for PLC Control Panel 1.1 General description This is a type of 10 layer printed ...
2026-04-13 05:31:19
|
|
Brief Introduction This 2-layer rigid PCB features a stackup with copper_layer_1 of 35 μm, a Rogers RO4725JXR Core of 30.7mil (0.780 mm), and copper...
2026-04-13 05:31:19
|
|
Brief Introduction This PCB is a 2-layer rigid board with stackup of 1oz (35μm) copper on top layer and bottom layer, sandwiching the 20mil DiClad 527 ...
2026-04-13 05:31:19
|
|
Brief Introduction This type of ceramic circuit board adopts an complicated 6-layer board design and selects aluminum nitride (AlN) as the substrate. ...
2026-04-13 05:31:19
|