91 - 100 of 269
immersion silver two layer pcb
Selling leads
|
We are excited to introduce our newly shipped 2-layer PCB constructed from Rogers TMM4 material, designed specifically for high-performance applicatio...
2026-04-13 05:31:19
|
|
... we’re talking about a type of 10-layer hybrid PCB built on RO4350B and FR-4. This board is used for high gain applications. The board actually is ...
2026-04-13 05:31:19
|
|
... the application of Signal transmission with 12 layer copper track. It's 2.0 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and ...
2026-04-13 05:31:19
|
|
...Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board ...
2026-04-13 05:31:19
|
|
... This is a type of flexible printed circuit (FPC) for the application of Wi Fi Antenna. It’s a 2 layer flex board at 0.15mm thick. It contains ...
2026-04-13 05:31:19
|
|
...s is a type of flexible printed circuit for the application of analog device. It’s a 2 layer board at 0.15mm thick. The base laminate is from ITEQ, ...
2026-04-13 05:31:19
|
|
... Frequency PCB With 10mil, 20mil, 30mil and 60mil Thick Coating Immersion Gold and Immersion Silver (PCB's are custom-made products, the picture ...
2026-04-13 05:31:19
|
|
...PCB Built on FR-4 and Poyimide With Immersion Gold and 90ohm Impedance Control (Flexible printed circuits are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
...Layer Flexible PCB Built on 1oz Polyimide With Carbon Ink and Immersion Gold For Laser Head (Flexible printed circuits are custom-made products, ...
2026-04-13 05:31:19
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-04-13 05:31:19
|