71 - 80 of 244
immersion silver surface pcb material
Selling leads
|
This PCB is a custom 2-layer rigid high-frequency board fabricated using Rogers RO4835 hydrocarbon dielectric laminate, designed for cost-effective, ...
2026-06-24 15:01:27
|
|
...PCB DK4.5 with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) General Description ...
2026-05-27 18:50:31
|
|
...PCB utilizes Rogers DiClad 527 fiberglass-reinforced PTFE substrate, engineered for high-precision, low-loss RF and microwave circuit applications. ...
2026-06-24 15:01:27
|
|
...PCB 4-Layer Thin PCB 0.4mm Multilayer FR-4 PCB With Immersion Gold for GPS Module 1.1 General description This is a type of 4 layer printed circuit ...
2026-05-27 18:53:52
|
|
...rigid high-frequency PCB utilizes Rogers RT/duroid 5880 glass microfiber reinforced PTFE composite, engineered for ultra-low-loss millimeter-wave ...
2026-06-24 15:01:28
|
|
PTFE PCB Board Built On 1.5mm PTFE Plate with 3oz Copper and Immersion Silver Pads for Power Amplifier (Printed Circuit Boards are custom-made ...
2026-05-27 18:53:30
|
|
... This is a type of 4-layer thin PCB board built on FR-4 substrate with Tg 135°C for the application of GPS Tracker. It's only 0.5 mm thick ...
2026-05-27 18:54:21
|
|
... transmission with 12 layer copper track. It's 2.0 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion gold on ...
2026-05-29 14:59:28
|
|
...PCB Built on TU-768 With 1.2mm Thick Coating Immersion Gold Multilayer TU-768 PCB (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-27 18:53:55
|
|
...PCB is a low-loss, high-stability microwave circuit board designed for RF, microwave, radar and satellite communication systems. Built with ...
2026-07-28 18:29:08
|