241 - 250 of 388
immersion gold ro4835 pcb
Selling leads
|
... built on FR-4 substrate with Tg 135°C for the application of GPS Tracking. It's only 0.6 mm thick without silkscreen on green solder mask (Taiyo) ...
2026-04-13 05:31:19
|
|
...PCB with 8mil, 12mil, 20mil, 32mil and 60mil Coating with Immersion Gold, Silver, tin and OSP (PCB's are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
...Frequency PCB Made on RT/duroid 5870 with 10mil, 20mil, 31mil and 62mil Coating with Immersion Gold (PCB's are custom-made products, the ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built on RF-35TC 10mil 0.254mm with Immersion Gold for Filters and Couplers etc. (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
... on top side and bottom side, plated through holes connect each layer. Viewing from the stack-up, each dielectric material is more than 0.2mmm ...
2026-04-13 05:31:19
|
|
Countersunk Aluminum PCB Countersink MCPCB Made On 1oz Copper With Immersion Gold 1.1 General description This is a type of Aluminum PCB for the ...
2026-04-13 05:31:19
|
|
...PCB Built on 30mil RF-60TC with Black Solder Mask Coating Immersion Gold for High Power Amplifiers. (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
... shown are just for reference) Brief Introduction This is a type of Taconic high frequency PCB using RF-35A2 substrate which is ultra low loss ...
2026-04-13 05:31:19
|
|
..., 30mil and 60mil thick Coating with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) ...
2026-04-13 05:31:19
|
|
Taconic PCB Built on RF-35TC 20mil 0.508mm with Black Solder Mask and Immersion Gold for Power Amplifiers (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|