1 - 10 of 493
immersion gold pcb circuit boards
Selling leads
|
...parameters shown are just for reference) Brief Introduction This is a type of ORCER (Organic Ceramic) RF-35 high frequency PCB. It’s built on 30mil ...
2026-05-27 18:54:43
|
|
In the fast-evolving landscape of electronics, the demand for high-performance printed circuit boards (PCBs) is at an all-time high. Our newly shipped ...
2026-05-27 18:51:05
|
|
... applications, particularly in the high-frequency sectors like 5G and millimeter-wave technologies. Unmatched Material: Rogers RO3035 At the heart ...
2026-05-27 18:51:05
|
|
Immersion Gold PCB ENIG Circuit Board Soft Gold PCB Chemical Gold Circuits for Intercom System 1.1 General description This is a type of matt blue PCB ...
2026-05-27 18:54:22
|
|
...Tg170 substrate for the application of codec equipment. It's 2.0 mm thick with white silkscreen on green solder mask and immersion gold on pads...
2026-05-27 18:54:05
|
|
... transmission with 12 layer copper track. It's 2.0 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion gold on ...
2026-05-29 14:59:28
|
|
...Circuit Board (PCB) Made on S1000-2M With Immersion Gold and 90 Ohm Impedance Control (Printed Circuit Boards are custom-made products, the picture ...
2026-05-29 14:59:24
|
|
Rogers High Frequency PCBs Built on 50mil 1.27mm TMM10 with Immersion Gold for GPS Antennas (Printed Circuit Boards are custom-made products, the ...
2026-05-27 18:50:45
|
|
Rogers High Frequency PCB Built On RO4730G3 20mil 0.508mm DK3.0 With Immersion Gold for Cellular Base Station Antenna (Printed Circuit Boards are ...
2026-05-27 18:50:27
|
|
...PCB Single-End Impedance Circuit Board 10 Layer PCB Board Satellite systems 1.1 General description This is a type of multilayer PCB built on FR-4 ...
2026-05-27 18:53:45
|