31 - 40 of 395
immersion gold pcb
Selling leads
|
...just for reference) General Description This type of high frequency PCB is made on Rogers TMM13i 60mil substrate. It’s a double sided board with ...
2026-05-28 07:30:16
|
|
...PCB Double Layer 20mil 0.508mm With Immersion Gold (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for ...
2026-05-28 07:30:16
|
|
...) General Description This is a type of 4-layer hybrid PCB mixed SCGA-500 GF265 and Tg170℃ FR-4 with 1oz copper on each layer, finished thickness ...
2026-05-28 07:30:16
|
|
Rogers TMM4 Microwave Printed Circuit Board 15mil 20mil 25mil 30mil 50mil 60mil With Immersion Gold (PCB's are custom-made products, the picture ...
2026-05-27 18:50:31
|
|
... Fi Antenna. It’s a 2 layer flex board at 0.15mm thick. It contains yellow coverlay (solder mask) and without silkscreen on entire board, and ...
2026-05-29 14:59:53
|
|
... board at 0.15mm thick. The base laminate is from ITEQ, It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Immersion gold is ...
2026-05-29 14:59:56
|
|
...-4 Tg175℃ substrate for the application of Satellite Radio. It's 1.6 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and ...
2026-05-27 18:53:40
|
|
...FR-4 Tg170 substrate for the application of GPS Tracking Devices. It's 1.6 mm thick with white silkscreen on green solder mask and immersion ...
2026-05-29 14:59:29
|
|
..., engineered to fulfill the high-performance requirements of RF, microwave, and phase-sensitive electronic systems. The Immersion Gold finish ...
2026-05-27 18:51:20
|
|
Taconic RF-35A2 PCB 20mil (0.508 mm) 30mil(0.762mm) 60mil (1.524mm) With Immersion Gold Immersion Silver and Blue Mask (Printed Circuit Boards are ...
2026-05-28 07:30:16
|