41 - 50 of 387
immersion gold finish pcb
Selling leads
|
...PCB Built on TU-768 With 1.2mm Thick Coating Immersion Gold Multilayer TU-768 PCB (Printed Circuit Boards are custom-made products, the picture and ...
2026-05-27 18:53:55
|
|
... PCB with 25mil and 50mil Coating Immersion Gold, Immersion Tin and Immersion Silver (PCB's are custom-made products, the picture and ...
2026-05-27 18:50:30
|
|
...General description This is a type of multilayer PCB built on FR-4 substrate with Tg 150°C for the application of mobile phone with blind via ...
2026-05-27 18:54:37
|
|
...Tg170 substrate for the application of codec equipment. It's 2.0 mm thick with white silkscreen on green solder mask and immersion gold on pads...
2026-05-27 18:54:05
|
|
...PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB ...
2026-05-27 18:53:52
|
|
... Fi Antenna. It’s a 2 layer flex board at 0.15mm thick. It contains yellow coverlay (solder mask) and without silkscreen on entire board, and ...
2026-05-29 14:59:53
|
|
... board at 0.15mm thick. The base laminate is from ITEQ, It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Immersion gold is ...
2026-05-29 14:59:56
|
|
...-4 Tg175℃ substrate for the application of Satellite Radio. It's 1.6 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and ...
2026-05-27 18:53:40
|
|
...FR-4 Tg170 substrate for the application of GPS Tracking Devices. It's 1.6 mm thick with white silkscreen on green solder mask and immersion ...
2026-05-29 14:59:29
|
|
...PCB Board Bulit On Rogers 20mil RO4003C with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for ...
2026-05-27 18:54:34
|