231 - 240 of 486
immersion gold customized pcb
Selling leads
|
...PCBs Built on FR-4 and Polyimide with Green Solder Mask and Immersion Gold for Telemetry System (FPC’s are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
...PCB with 8mil, 12mil, 20mil, 32mil and 60mil Coating with Immersion Gold, Silver, tin and OSP (PCB's are custom-made products, the picture and ...
2026-04-13 05:31:19
|
|
...Frequency PCB Made on RT/duroid 5870 with 10mil, 20mil, 31mil and 62mil Coating with Immersion Gold (PCB's are custom-made products, the ...
2026-04-13 05:31:19
|
|
... 150°C for the application of micro SATA carrier board. It's 2.4 mm thick with white silkscreen(Taiyo) on green solder mask (Taiyo) and immersion ...
2026-04-13 05:31:19
|
|
Taconic High Frequency PCB Built on RF-35TC 10mil 0.254mm with Immersion Gold for Filters and Couplers etc. (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
...PCB Built on 30mil RF-60TC with Black Solder Mask Coating Immersion Gold for High Power Amplifiers. (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
... shown are just for reference) Brief Introduction This is a type of Taconic high frequency PCB using RF-35A2 substrate which is ultra low loss ...
2026-04-13 05:31:19
|
|
..., 30mil and 60mil thick Coating with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) ...
2026-04-13 05:31:19
|
|
Taconic PCB Built on RF-35TC 20mil 0.508mm with Black Solder Mask and Immersion Gold for Power Amplifiers (Printed Circuit Boards are custom-made ...
2026-04-13 05:31:19
|
|
.... The 1oz copper on both sides ensure superior conductivity and signal transmission quality. No solder mask or silkscreen characters are applied. ...
2026-04-13 05:31:19
|