31 - 40 of 109
green solder mask immersion gold pcb
Selling leads
|
...PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB ...
2026-05-27 18:53:52
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-05-27 18:53:55
|
|
...just for reference) General Description This is a type of low weight antenna PCB made on Taconic TLY-5Z substrate with 30mil thickness, starting 0...
2026-05-27 18:51:37
|
|
... circuit board built on FR-4 Tg175℃ substrate for the application of Satellite Radio. It's 1.6 mm thick with white silkscreen(Taiyo) on green ...
2026-05-27 18:53:40
|
|
...FR-4 Tg170 substrate for the application of GPS Tracking Devices. It's 1.6 mm thick with white silkscreen on green solder mask and immersion ...
2026-05-29 14:59:29
|
|
...) 1.1 General description This is a type of fast lead time required multilayer PCB built on FR-4 substrate with Tg 150°C for the application of ...
2026-05-29 14:59:26
|
|
...PCB Built On FR-4 With Immersion Gold for Data Acquisition. 1.1 General description This is a type of 3.0mm thick PCB built on double sided FR-4 ...
2026-05-27 18:53:50
|
|
...PCB DK4.5 with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) General Description ...
2026-05-27 18:50:31
|
|
...s is a type of aluminum PCB for the application of communication electronic equipment. It's a single layer MCPCB board at 1.6 mm thick with 3 W...
2026-05-29 14:59:41
|
|
... This is a type of 4-layer thin PCB board built on FR-4 substrate with Tg 135°C for the application of GPS Tracker. It's only 0.5 mm thick ...
2026-05-27 18:54:21
|